10-50Ton Rubber Tyred double beam Gantry Crane / RTG Crane
Application
RTG Crane Container Rubber Tyre Gantry Crane is widely used in outdoor of warehouse, container yard, port, material yard, or workshop to assemble, to load and unload cargo, cabin control or remote control or pendent line with push button.
Product detail description
1. Strong beams. The crane beams are of welded construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and smaller wheel loads.
2. End carriage: Crane travelling system, Motor-Reducer-Wheel driven system! Motor used soft start motor which result in very stable starting!
3. Durable performance and High efficiency!
4. Outstanding heat resistance with thermal-protective coating added at the bottom of the main beam!
5. Electrical equipment: Electric systems are Siemens brand or Schneider brand!
6. Long service life with a low-maintenance!
Important Technical Data:
Lifting capacity: 10~50/10t
Span: 18~35m (it can de redesigned as client's requirements)
Lifting Height: No limited (can be designed according to client's requirement)
Working Duty: A5 (according to the use frequency and working time)
Power supply: 3ph, 380V, 50HZ (or under customer's requirement).
The obvious characteristics:
1. MG model double beam gantry crane consists of four main parts: The bridge structure, the trolley traveling mechanism, crane traveling mechanism and the electric equipment.
2. The girders and frame are welded structure without weld joint and high degree of vertical and horizontal rigidity.
3. The lifting mechanism is electric trolley, it can equip with hook and other tools to lift containers. Some rail, gear, wheel relevant parts with good quality manufactured by our own group, the quality is easily been controlled.
4. The main electric parts are Siemens and other famous brand. The motor is heavy duty slide ring type, Xindali brand or some other brand top quality in China. The buffer adopts polyurethane material and the brake is electric hydraulic type.
5. This crane has two kind conductive forms: Cable and slip line. Slip line are first recommended, the conductive form and position should be definite when place an order.
Operation mode:
Operation is in the cabin room which is commodious and comfortable.
Safety protection devices:
Close type hook, anti-collision system, weight overload protection device, emergency switch and so on.
Good painting:
Primer and finishing paint, color as the clients' requirements.
| Overall Technical Parameters |
|
| construction type |
box beam type |
| mainwheel center distance |
9500mm |
| working level |
A3 |
| maximum Wind velocity operating status |
6 |
| maximum wind velocity nonoperting status |
11 |
| battery(diesel engine) |
50GF |
| service weight |
20T |
| overall motor power |
22KW |
| |
|
| lifting paramenters |
|
| lifting weight |
20T |
| overall height |
6400MM |
| lifting speed |
7000mm/minute |
| shifting speed |
20000mm/minute |
| operating level |
M4 |
| steel rope |
13NTA6*37 |
| motor power |
18KW+0.8KW*2 |
| |
|
| traveling paramenters |
|
| driver type |
2 tire drive |
| operating speed |
15000mm/minute |
| maximum Wheel pressure |
6T |
| wheel diameter |
800mm |
| motor power |
3KW*2 |
| wheel type |
Solid tire |
| |
|
| Steering parameters |
|
| Transmission Type |
Hydraulic 2tire divertion |
| Steering angle |
from-20 to 20 |
| steering Thrust |
1 T |
| pump motor power |
3KW |
Audited Supplier 
){kind=link}